TMV 0512S

DC/DC Converter TMV Series, 1 Watt • • • • Industry standard pinout • • Efficiency up to 81 % Unregulated device I/O isolation voltage 3000 VDC Operating temperature range –40 °C to +85 °C 3-years product warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation in a single-in-line package (SIP). Requiring only 1.2 cm² board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high performance at low cost Models Order Code Input Voltage Range TMV 0505S TMV 0509S TMV 0512S TMV 0515S TMV 0505D TMV 0512D TMV 0515D TMV 1205S TMV 1212S TMV 1215S TMV 1205D TMV 1212D TMV 1215D TMV 2405S TMV 2412S TMV 2415S TMV 2405D TMV 2412D TMV 2415D www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 9 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 200 mA 110 mA 84 mA 67 mA 100 mA 42 mA 34 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA 200 mA 84 mA 67 mA 100 mA 42 mA 34 mA September 20, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA –5 VDC –12 VDC –15 VDC 100 mA 42 mA 34 mA typ. 71 % 76 % 78 % 78 % 72 % 78 % 79 % 73 % 80 % 80 % 74 % 81 % 81 % 71 % 78 % 79 % 72 % 79 % 80 % Page 1 / 4 TMV Series, 1 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 30 mA typ. 12 mA typ. 7 mA typ. 270 mA typ. 110 mA typ. 55 mA typ. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) 500 mA (slow blow) 200 mA (slow blow) 100 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth Capacitive Load - single output - dual output single output models: dual output models: See application note: dual output models: 5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±3% max. 1.5% max. 1.5% max. www.tracopower.com/overview/tmv 1% max. 65 mVp-p typ. 100 mVp-p max. (To further reduce Ripple and Noise, a capacitor with 1.0 μF X7R is recommended.) 220 µF max. 220 µF max. 220 µF max. 220 µF max. 100 / 100 µF max. 100 / 100 µF max. 100 / 100 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 230 ms max. Limited 0.5 s max., Automatic recovery EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tmv General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature 95% max. (non condensing) –40°C to +85°C +105°C max. –50°C to +125°C 4 %/K above 75°C (5 & ±5 Vout models) 4 %/K above 80°C (other Vout models) See application note: www.tracopower.com/overview/tmv All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TMV Series, 1 Watt Cooling System Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Natural convection (20 LFM) 70 - 120 kHz (PFM) 100 kHz typ. (PFM) Functional Insulation 3'000 VDC 10'000 MΩ min. 60 pF typ. 100 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Nickel-Iron (Alloy 42) Nickel (1 µm min.) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP7 Lead-Free Wave Soldering 260°C / 10 s max. 5 Vin models: 2.2 g 12 Vin models: 2.2 g 24 Vin models: 2.6 g 61.2 K/W typ. www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) ab1a3185-a9a1-432f-ae3c-de2d13eba41b Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmv All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TMV Series, 1 Watt Outline Dimensions 19.5 (0.77) Pinout 10.2 (0.40) Dual 1 +Vin (Vcc) 2 –Vin (GND) 5 –Vout 6 7 3.2 0.5 (0.02) Single No pin Common +Vout (0.13) 0.5 (0.02) Pin 2.1 (0.08) 2.54 7.62 2x 2.54 (0.100) (0.300) (2x 0.100) 1 2 5 6 7 T 1.3 (0.05) Bottom view 0.25 (0.010) 18.5 (0.73) 0.50 (0.020) T: 6.1 (0.24) for 5 Vin & 12 Vin Models T: 7.1 (0.28) for 24 Vin Models Dimensions in mm (inch) Tolerance: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin tolerance: ±0.05 (±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4